1. <track id="icaup"><div id="icaup"></div></track>
    2. <menuitem id="icaup"></menuitem>
    3. <menuitem id="icaup"></menuitem>

      <tbody id="icaup"><div id="icaup"></div></tbody>
      <track id="icaup"><span id="icaup"></span></track>
      Contact

      Troubleshooting and Maintenance of the Steel Sheet Cutting Machine

      The steel sheet cutting machine is a machine in which one blade reciprocates the linear motion of cutting plate with another blade. It is widely used in aviation, light industry, metallurgy, chemical industry, construction, ship, automobile, electric power, electric appliance, decoration and other industries to provide special machinery and complete sets of equipment.

      The following situations may occur during the use of the machine:

      1. Start the steel sheet cutting machine and make some idle runnings to ensure that under normal circumstances, the sheet materials with different thickness are tested from thin to thick. Ensure that the user is familiar with its performance.

      2. The clearance of different blade must be adjusted for different plate thickness during the trial cutting. If the corresponding blade clearance is not adjusted, the durability of the blade will be negatively affected.

      3. The pressure gauge switch is opened in the shearing process of the plate shears to observe the oil pressure value. The pressure of the 12mm board shears should be less than 20mpa. The pressure of this remote pressure-regulating valve no9 is set at 20-22mpa at the time of delivery,  so the user must comply with this regulation, and shall not increase the pressure for the material beyond the regulation, which will cause damage to the machine.

      4. Sound balance during operation. If there is any noise, stop and check.

      5. When the steel sheet cutting machine operates, the increase of temperature of the oil tank should be less than 60 degrees, otherwise, close the machine for rest.

      Maintenance of the steel sheet cutting machine :

      1. Operate in strict accordance with operating rules.

      2. Add lubricating oil regularly and quantitatively in the fixed place according to the requirements of the lubrication chart before starting the machine, and the oil shall be clean without precipitation.

      3. The machine tool must be kept clean frequently and the unpainted part should be added the anti-rust grease.

      4. The lubricating oil in the motor bearing shall be regularly replaced and refilled, and the electrical part shall be checked regularly to see if it is normal, safe and reliable.

      5. Regularly check whether the triangle belt, handle, knob and key are damaged, and replace them in time if it is seriously worn, and report to the spare parts for the supplement.

      6. Regularly check and repair switches, insurance and handles to ensure their reliability.

      7. Lubricate and scrub the machine tool ten minutes before the end of work every day.

      8. It is strictly prohibited for the non-designated person to operate the equipment.

      Hydraulic pendulum steel sheet cutting machine is in the movement of an arc, while arc blade production is very difficult, which is commonly made mat iron blades after compensation, so the clearance is not accurate,  and sheet metal is not very ideal. Because of the arc movement, the rectangular blade doesn't fit, instead, it should in a sharp angle, so the force of the blade is not ideal, the blade damage is severe.

      Above is the troubleshooting and maintenance, I hope it will help.
      Related News
      • Round Duct Machine in Duct System

        Round Duct Machine in Duct System

        December 4, 2019The air duct system is the most important part of air conditioning and ventilation engineering.view
      • Duct Beader Machine

        Duct Beader Machine

        July 25, 2019The duct beader machine is roughly divided into CNC duct beader machine, hydraulic duct beader machine and so on. It is used in pipeline laying and repair of the electric power construction, railway c...view
      • Advantages and Applications of Hand Flanging Machine

        Advantages and Applications of Hand Flanging Machine

        July 30, 2018Hand folding machine is a combination of the advantages of various hand folding machines, its greatest advantage is that it has a movable, divisible upper mold, and can be adjusted according to the di...view
      • Application of Square Duct Machine

        Application of Square Duct Machine

        July 25, 2019Stainless steel square duct is a hollow strip of steel, because the section is square, so it is called square duct. A large number of pipelines are used to transport fluids, such as petroleum, natural...view
      • Application Of Automatic Elbow Machine

        Application Of Automatic Elbow Machine

        June 27, 2019In today's society with rapid technological development, in order to supply people's needs, there are also a variety of construction machinery and equipment on the market, which is convenient, fast an...view
      • (Pipe Beader)Operation Mode of Whole Automatic Pipe Bender

        (Pipe Beader)Operation Mode of Whole Automatic Pipe Bender

        July 25, 2019With the development of social science, automatic pipe bender has been developed. The angle of bending pipe of hydraulic pipe bender needs to be adjusted manually. The precision of manual feeding can ...view
        1. <track id="icaup"><div id="icaup"></div></track>
        2. <menuitem id="icaup"></menuitem>
        3. <menuitem id="icaup"></menuitem>

          <tbody id="icaup"><div id="icaup"></div></tbody>
          <track id="icaup"><span id="icaup"></span></track>
          一级a做视频免费观看,欧美高清在线精品一区,116美女写真午夜一级,欧美日韩无码有码在线,中文字幕5566最新网站,偷柏自拍亚洲不卡综合在线