1. <track id="icaup"><div id="icaup"></div></track>
    2. <menuitem id="icaup"></menuitem>
    3. <menuitem id="icaup"></menuitem>

      <tbody id="icaup"><div id="icaup"></div></tbody>
      <track id="icaup"><span id="icaup"></span></track>
      Contact

      The Operation Keys of Angle Shearing Machine

      With the development of industrial society, a large number of mechanical equipment have been widely used. Among these, the angle shearing machine is used in the fields of automobile manufacturing, ships, elevators, electrical equipment, pipes, cookers and stainless steel products. During the manufacturing process, the operational process also needs to be paid attention to.

      1. Operators must understand the performance, correct operating procedures and the usage of the machine.

      2. Adjust the position of the hand wheel and the angle of the hand wheel in line with the angle and dimension of the drawing. And adjusting the position of the horn through the positioning scale on the surface of workpieces.

      3. In the production process, the operator must strictly operate according to the drawings and follow the requirements of the quality control process.

      4. In production, operators should first check whether the dimensions of the material are accurate, confirm it correct, and then operate according to the requirements of the drawings.

      5. The operator will introspect each first piece that cut from the blocks, and then notifies the inspector to verify the correctness. The operator is able to batch operate. In the process of operation, except the inspectors do sampling, operators should also test from time to time to prevent batch errors.

      6. In the production process, the operator must carry out the plate finishing and place the whole plate according to the project. And make the light to prevent the surface scratches.

      7. After the horn is completed, turn off the power switch, tidy up the table and the health condition of its own body, keep the equipment clean and clean the floor box.

      8. Work equipment cannot clean up waste, lubricating machine and so on.

      9. When many people operate a device at the same time, they must have a clear division of labor and work together.

      10. It is strictly prohibited stamping thick plates, super hard or welding scar, welding, dispersion and other defects, so as not to damage the machine edge.

      11. In the work, if the machine has abnormal sound, please stop immediately and check until detecting the cause. restart the work after the troubleshooting. If the operator cannot handle it, please notify the maintenance personnel to deal with it in time.

      12. Maintain the shearing machine regularly according to the requirements of the equipment maintenance system.
      Related News
      • Common Failure And Analysis of Duct Joint Machine.

        Common Failure And Analysis of Duct Joint Machine.

        July 5, 2018Duct joint machine is a kind of mechanical equipment used for duct joint, which is simple in structure and easy to operate. It can also be used in conjunction with other air duct equipment, which grea...view
      • The Advantages of TDF Flange Forming Machine

        The Advantages of TDF Flange Forming Machine

        July 30, 2018As a kind of connecting equipment commonly used in pipeline installation, TDF flange forming machine is more and more popular in China. For TDF flange forming machine, its biggest characteristic is re...view
      • Key Points for the Use of the Locking Making Machine

        Key Points for the Use of the Locking Making Machine

        July 30, 20181. The thickness of the plate of the nip machine should be within the delimited category of various specifications. If it is less than the minimum thickness, it is easy to crack and wrinkle when using...view
      • A Brief History of Steel Sheet Cutting Machine

        A Brief History of Steel Sheet Cutting Machine

        July 30, 2018Due to the demand for Manufacturing, a growing number of steel sheet cutting machines have been put into production. Now let' s take a brief view over the history of its development.Steel sheet cuttin...view
      • Regular Check on Work Situation of Auto Duct Line

        Regular Check on Work Situation of Auto Duct Line

        July 30, 2018The auto duct line plays a very important role in the manufacturing process of an enterprise. Therefore, its maintenance is very important. Although the auto duct line is only to process machine, its ...view
      • How Does The Flanging Machine Roll The Steel Round?

        How Does The Flanging Machine Roll The Steel Round?

        July 5, 2018Flanging machine is the equipment that can roll all kinds of steel coil round, in its working process each component needs to cooperate with each other to let the steel roll circle, so how does each c...view
        1. <track id="icaup"><div id="icaup"></div></track>
        2. <menuitem id="icaup"></menuitem>
        3. <menuitem id="icaup"></menuitem>

          <tbody id="icaup"><div id="icaup"></div></tbody>
          <track id="icaup"><span id="icaup"></span></track>
          一级a做视频免费观看,欧美高清在线精品一区,116美女写真午夜一级,欧美日韩无码有码在线,中文字幕5566最新网站,偷柏自拍亚洲不卡综合在线